Molding Technology Product List and Ranking from 58 Manufacturers, Suppliers and Companies

Winding technology and insert molding technology

Contributing to space-saving and cost reduction of the device! A component that combines coils with other parts!

At Nikko, we can combine the technology of coil winding and insert molding to create components that integrate coils with other parts. Multiple coils can be wound onto a single bobbin. It is possible to attach other functional components to the bobbin or incorporate parts other than the coil during the molding process, allowing them to be formed into a single component with resin. 【Features】 ■ Capable of creating components that integrate coils with other parts ■ Multiple coils can be wound onto a single bobbin ■ Contributes to space-saving and cost reduction of devices ■ Coils and metal parts can be molded together with resin *For more details, please refer to the PDF materials or feel free to contact us.

Company：ニッコーシ
Price：Other

Processing Contract
Other processing machines
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Molding Technology: Multi-layer Molded Rubber

Supports three-layer molding! It is possible to perform multi-layer integrated molding between materials of different hardness and different types.

Our company performs multilayer integrated molding using various materials and molds. It is possible to integrally mold a very soft, highly compressible ultra-soft rubber on the inside and a high-hardness rubber that is strong and durable on the outside. Additionally, we can achieve two-layer integrated molding of synthetic rubbers with different polarities, such as SBR and EPDM, as well as three-layer integrated molding of water-swelling non-woven fabrics, metals, hard rubber, and soft rubber. 【Features】 ■ Use of molds ■ Possible multilayer integrated molding of products with different hardness ■ Possible multilayer integrated molding of different materials ■ Support for three-layer molding *For more details, please refer to the PDF materials or feel free to contact us.

Company：共和ゴム
Price：Other

Rubber
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

スーパーエンジニアリングプラスチック製　大型部品成形技術

軽量で過酷な環境に耐えるスーパーエンプラ製大型部品を提供。材質特性を紹介した資料進呈

当社は、耐熱性や機械的強度、耐薬品性が求められる用途に適した「スーパーエンプラ(スーパーエンジニアリングプラスチック)」製の部品を製造しています。豊富なノウハウにより、シビアな条件設定が必要なスーパーエンプラ製部品でも、大型形状、複雑形状といった高難度の成形が可能。航空宇宙・防衛産業無得の品質マネジメントシステムAS9100認証を取得しており、精度と信頼性が求められる部品の大量生産にも適しています。【特長】 ■大型・複雑形状のスーパーエンプラ製部品の成形に対応 ■金型の設計・解析やメンテナンスにも対応可能 ■1,300トン大型射出成型機を保有し、9kg弱の成形に対応 ■AS9100認証に基づく品質マネジメント体制を構築 ※＜カタログダウンロード＞より、事業の概要と材質特性の紹介資料をご覧いただけます。　お問い合わせもお気軽にどうぞ。

Company：サカセ化学工業
Price：Other

Engineering Plastics
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hybrid molding technology for CFRTP (patented)

The interface strength is strong and the design is excellent! Molding was achieved in one process solely through press molding.

We have made it possible to combine continuous fibers and discontinuous fibers in a process called "hybrid molding" through our unique technology. Traditionally, multiple processes were required using methods such as press molding and injection molding, but we have achieved molding in a single process using only press molding. We can add ribs/bosses made of discontinuous fibers to the inner surface, while designing the outer layer with a rich aesthetic using continuous fibers. We can provide CFRTP molded products that are high-strength, lightweight, and excellent in design due to the added strength of continuous fibers. 【Features】 ■ Process reduction ■ Strong interfacial strength ■ Only one side of the mold is needed ■ High strength and lightweight ■ Excellent design ■ Mass production is possible *For more details, please refer to the PDF document or feel free to contact us.

Company：TIP composite Co., Ltd.
Price：Other

Injection Molding Machine
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lightweighting becomes possible! What is the joining technology of metal and resin? *With explanatory materials.

Lightweight metal exterior components! Integrated molding using metal and resin injection molding.

"NMT (Nano Molding Technology)" is a technology for integrated molding of metal and resin through injection molding. By applying surface treatment to the metal, nano-level dimples are formed on the metal surface. These fine dimples are filled with hard resin through injection molding, thereby integrating metal and resin. Additionally, since processes such as surface treatment are unnecessary, like in magnesium alloy molding technology, it contributes to cost reduction and shorter processing times. During recycling, the risk of ignition is low, allowing for safer operations, which also helps reduce environmental impact. 【Compatible Resins and Metals】 ■ Resins - PPS, PBT, PA6, PA66, PPA ■ Metals - Aluminum, Magnesium, Copper/Brass - Stainless Steel/Titanium/Iron/Aluminum-coated Steel *For more details, please refer to the PDF document or feel free to contact us.

Company：大成プラス
Price：Other

others
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multilayer technology that allows for the distribution adjustment of barrier materials in PET containers.

While keeping the freshness of the contents, reduce losses with high-precision distribution of barrier materials and enhance design quality.

Our "multilayer technology" allows for precise distribution of barrier materials in PET containers, enhancing the packaging performance of food and beverages, including carbonated drinks. The injection molding system "HyPET HPP5" supplies an accurate amount of barrier material, enabling high-precision distribution only where needed, which also allows for cost reduction. It achieves a balance between the protective performance of the contents and the diversity of package design. 【Features】 ■ Can be manufactured with a variety of barrier content (including less than 3%) ■ Can save up to 50% on barrier material costs ■ Existing lines can be used for package blowing and filling ■ No special molds or equipment required *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Company：HUSKY
Price：Other

Other processing machines
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin Injection Molding Technology | From small molded products to large molded products!

Fluororesin | High quality and mass production achieved with a special injection molding machine compatible with PFA, PVDF, ETFE, etc.! Capable of producing molded products of various sizes!

Fluororesin | We specialize in injection molding of PFA, PVDF, ETFE, and more. ★ We utilize highly sophisticated molding technology and flow analysis to meet our customers' needs. ★ We mainly handle PFA, a representative of molten fluororesins, as well as ETFE, PPS, and grades with fillers. ★ From large molded products to small molded products, we enhance the reproducibility of molding technology and accommodate small lot production, injecting a wide variety of products for diverse applications. ★ We also have a track record of various welding of molded products and fully sealed insert molding. 【Applications】 - Heat exchangers - Printer rollers - Wafer carriers - Joints - Valve bodies 【Main Equipment】 - Injection molding machines (20t to 460t), etc.

Company：MEIKO KOGYO CO., LTD.
Price：Other

Other machine elements
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin Material Molding Technology | Eliminate Residual Stress in PTFE Material!

Remove residual stress with annealing treatment! High-quality fluororesin | PTFE material molding!

Introducing the fluororesin from Meikou Industrial | PTFE material molding technology: hot coining and annealing. ★ Hot Coining This is a technique used when molding thin and complex shapes. The material is fired and then placed in a different mold while applying pressure during cooling. ★ Annealing This is a technique for removing internal distortions (residual stress) present in the molded material. After firing the material, it is reheated in an electric furnace and gradually cooled down to room temperature.

Company：MEIKO KOGYO CO., LTD.
Price：Other

Engineering Plastics
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin Injection Molding Technology | Integrated Molding of Metal Parts and Fluororesin!

Fluororesin | Sandwiching metal parts with PFA and others! Integrated through insert molding!

Insert molding is a molding method in which metal parts and other components to be embedded in a product are pre-installed in a mold, and resin is injected into that mold through processes such as injection molding. With insert molding, it is possible to integrate dissimilar material components such as resin and metal. 【Features】 ★ By not making the entire product out of resin, it is possible to enhance strength and durability! ★ The surface is covered with fluororesin, allowing for properties such as chemical resistance and low friction to be utilized! ★ Since molding is done using a mold, it is suitable for mass production!

Company：MEIKO KOGYO CO., LTD.
Price：Other

Other machine elements
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Molding technology to suppress the reduction of weld line strength.

【Projector Screen Frame】 Material: MXD-6 Lenny GB65% Machined from aluminum casting, it has been integrated with resin to achieve significant cost reduction.

Company：府中プラ本社工場・本山工場
Price：Other

Contract manufacturing
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compatible with wood powder and other natural fiber mixed resins! WPC extrusion molding technology.

Natural fibers such as wood powder, paper scraps, rice husks, hemp, and sugarcane fibers can be blended up to 75%! Extrusion technology using new plastic resin blends.

The selection of fibers and plastic resins, along with the variations in their blends, can yield an infinite range of physical properties! Our WPC extrusion machine can produce and extrude materials necessary for applications such as rigidity, weather resistance, water absorption, and surface properties. This technology allows for the creation of various shapes in a single production process. The following polymers and natural fiber raw materials can be molded at high ratios. Polymers: (melting point < 200°C) - PP - PE - PVC Natural fibers: - Wood chips and wood fragments - Paper scraps - Rice husks - Hemp - Press cake (sugarcane fiber) Examples of natural fiber ratio ranges: - PP-based mixture: 40-70% - PE-based mixture: 40-75% - PVC-based mixture: 15-50% [Features] - Capable of creating various shapes in a single production process - Natural fiber blending ratio up to 75% possible - Can be recycled repeatedly - Able to produce materials necessary for applications such as rigidity, weather resistance, water absorption, and surface properties *For more details, please refer to the PDF document or feel free to contact us.

Company：バッテンフェルト・シンシナティ日本支社
Price：Other

Extrusion Machine
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Extrusion molding technology for endoscopic treatment tubes

Developed an extrusion molding technology that forms an independent lumen in a spiral shape within the wall of a tubular body.

At Kōhan Co., Ltd., which operates a resin molding business in Hyogo Prefecture, we are engaged in the research and development of over tubes for endoscopic treatment. During the development process, we developed an extrusion molding technology that forms an independent lumen (side channel) in a spiral shape within the wall of the tube body (patent pending). Additionally, we are also challenging the establishment of a "dual-layer irregular extrusion molding technology" that features an independent lumen in the tube body, with different hardness on the inner and outer diameters. For more details, please contact us or refer to our catalog.

Company：工販
Price：Other

others
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manufacturing Technology: Fiber Reinforced Plastic (FRP) Molding Technology

We can perform consistent manufacturing from the molding to processing and inspection of fiber-reinforced plastic (FRP).

The processed products are rigorously checked using medical X-ray equipment. By detecting internal damage and foreign matter that cannot be discerned from the appearance, we are able to provide highly reliable products.

Company：サカイ産業
Price：Other

Resin processing machine
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insert molding of resin and metal, two-color molding technology.

It is a molding technology that provides waterproof and dustproof sealing functions, also contributing to the reduction of assembly man-hours!

It is a composite molding technology that gives rubber parts waterproof and dustproof sealing functions, ranging from small components to large molded products, in order to reduce assembly labor.

Company：Kinjo Rubber Co., Ltd.
Price：Other

Rubber mold
Molding Technology

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Basic Knowledge】What is Extrusion Molding Technology?

Heating and melting plastic pellets! It is also possible to extrude various engineering plastics and mold large products.

"Extrusion molding" is a molding method that achieves dimensional accuracy by heating and melting plastic pellets in an extruder and extruding them from a mold with a specific product shape. A characteristic of extruded products is that they have the same cross-sectional shape regardless of where they are cut along the longitudinal direction. Using raw materials with various functions, it is widely utilized in diverse industrial materials and equipment such as lighting, building materials, civil engineering, agriculture, vehicles, and electronic components. Our company possesses a wealth of extrusion molding technologies, including "engineering plastic molding," "composite molding," and "decorative material molding." Please feel free to contact us. 【Extrusion Molding Technology】 ■ Engineering Plastic Molding: Capable of extrusion molding various engineering plastics ■ Composite Molding: Allows for composite extrusion molding of different colors of the same material or soft and hard materials ■ Foaming Molding: A method primarily aimed at achieving lightweight and cost reduction ■ Molding of Large Products: Capable of molding sizes up to 170mm in height and 400mm in width ■ Molding of Decorative Materials: Can express the quality of wood and metal with resin *For more details, please refer to the related links or feel free to contact us.

Company：杉山産業焼津工場
Price：Other

Extrusion Machine
Molding Technology

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical Introduction: Gas Barrier Tank [Barrier Properties / Pseudo-Multilayer / Cost Reduction]

Lowering the cost of gas barrier tanks! We have developed a new technology to replace multi-layer blow molding and fluorination treatment. (FY 2010 New Collaboration Support Project)

Our "Gas Barrier Tank" utilizes a pseudo-multilayer molding technology that disperses a barrier layer (special nylon) within a single layer of resin (HDPE). It meets the fuel permeability regulations of CARB (California Air Resources Board) and EPA (Environmental Protection Agency) (PAT). Compared to multilayer molding and fluorination treatment, it allows for the cost-effective production of barrier containers. For more details, please contact us or refer to our catalog.

Company：羽立化工
Price：Other

plastic
Contract manufacturing
Processing Contract
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insert molding technology

Meeting the needs for "small space and high reliability"! Microfabrication technology is being utilized.

We would like to introduce our "Insert Molding Technology." Starting with insert molding with sharp edge presses, we offer stable quality through hoop molding and automatic composite molding with narrow pitch presses, as well as hoop molding and ultra-precision presses. Additionally, we can also provide prototypes through rotary molding and etching. Our precision insert molding, which meets the needs for "compact space and high reliability," utilizes the microfabrication technology developed by Daiichi Kasei. 【Features】 <Insert Molding with Sharp Edge Presses> ■ Insert molding with sharp edge (pressed products) ■ Stable molding processing (hoop molding) is possible <Automatic Composite Molding with Hoop Molding and Narrow Pitch Presses> ■ Automatic composite molding with 0.5mm narrow pitch presses ■ Provides stable quality *For more details, please refer to the related links or feel free to contact us.

Company：第一化成本社工場
Price：Other

Other processing machines
Processing Contract
Molding Technology

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pin manufacturing, special needle production, wire processing, insert molding technology.

Metal processing such as headers, cutting, pointed ends, bending, crushing, grooving, etc., as well as insert molding that combines metal processed products with resin, is possible. *Production comparison materials available.

Meikoudou specializes in metal processing such as header, cutting, pointed end, bending, crushing, and grooving, as well as insert molding that combines metal processed products with resin. We can also design and manufacture the necessary equipment for mass production of OEM products. *We can accommodate products that cannot be made with equipment available in the market. We are currently offering comparison materials on production capacity for changes such as "from cutting processing to pointed end polishing processing" or "from press-fitting, assembly, and adhesion to insert molding," as well as our efforts to reduce development costs! 【Frequently Asked Questions】 - Do you handle import and export of products? - Can you create injection molding molds? - Can you do business with the medical industry? Do you have any track record? - Can you import (procure) cheaply from China? - What is the minimum lot size? Can you accommodate smaller quantities? *For more details, please refer to the related links page or feel free to contact us.

Company：明光堂
Price：Other

Contract manufacturing
Processing Contract
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Kanemori Chemical Industry Co., Ltd. - Extrusion Molding Technology

We respond to the needs for large molded products with top-class technology in Japan.

Kanemori Chemical Industry Co., Ltd.'s extrusion molding technology possesses advanced capabilities to stabilize the shape, thickness, and dimensional accuracy of extruded products known as "large profiles," which exceed approximately 500mm in width. For large cross-section products, which are considered challenging among non-standard extruded products, we achieve this through our unique mold technology and Japan's top-class advanced non-standard extrusion technology. We respond to various requests, including products with diverse characteristics and functions tailored to needs, as well as non-standard cross-section products. 【Features】 - Enables the creation of high-difficulty products through unique technology - Generates diverse characteristics and functions according to needs - Contributes to next-generation urban development with advanced extrusion molding technology - Supports various industrial fields where technological innovation is progressing - Equipped with durability to protect against impact and high weather resistance against wind and rain For more details, please contact us or download the catalog.

Company：金森化学工業
Price：Other

plastic
Processing Contract
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Hoop Shape Molding Technology (Insert Molding)

Achieve efficiency in the production process! We propose complete automation from molding to packaging through mold design and process design.

The "hoop molding technology" enables high-efficiency production through a continuous production line that connects injection molding machines and press machines. We can propose fully automated solutions by designing molds and processes with productivity in mind. The inspection process after molding is automated by incorporating image inspection machines. Furthermore, by introducing equipment such as embossing machines, it is also possible to automate the packaging process. 【Features】 ■ A continuous production line that connects injection molding machines and press machines ■ Continuous production at the same pitch, significantly improving process efficiency ■ Mold and process designs that consider productivity ■ Automation of the inspection process after molding by incorporating image inspection machines ■ Possibility of automating packaging by introducing equipment such as embossing machines * The catalog can be viewed by clicking the "PDF Download" button below. * Please feel free to request quotes or ask any questions.

Company：玉川電器
Price：Other

Processing Contract
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Molding technology "Micro Foamed Molding"

Molding technology that achieves high precision with reduced product weight and improved transferability.

The "Micro Microbubble Molding" of Shinsei Chemical Industry Co., Ltd. is a molding technology developed by our company. It improves resin flowability, enabling effective molding for thin and long items. Additionally, it achieves higher precision through improved transferability, lightweight molded products, and enhanced tensile strength. 【Features】 ■ Lightweight ■ High precision ■ Optimal for thin and long items *For more details, please contact us or download the catalog.

Company：新生化学工業
Price：Other

Mechanical Design
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-precision metal insert molding technology

Significantly reduce the cost of secondary processing! Insert molding of multiple metal parts simultaneously.

Our company possesses the technology to simultaneously insert mold complex-shaped metal parts within a mold. By integrating metal parts through this process, we significantly reduce the costs of secondary processing. This technology can be utilized for components connected to power distribution circuits. For hybrid vehicle power distribution components that connect the motor and power control unit, we employ a molding technology that inserts multiple three-dimensional metal parts simultaneously into the mold. 【Features】 ■ The specified range of metal parts is enveloped in resin, enhancing insulation performance. ■ We possess in-mold metal insert technology that can reproduce geometric dimensions with high precision. ■ Molding material: PPS (Polyphenylene Sulfide) + GF (Glass Fiber) *For more details, please refer to the PDF document or feel free to contact us.

Company：タカギセイコー
Price：Other

Other metal materials
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rotational molding technology

The optimal molding technology for large and complex hollow products!

Rotational molding is a processing method in which powdered resin is placed into a hollow mold, and the mold is heated and cooled while being rotated. It is ideal for large and complex integrated shapes. Our company has been producing urea water tanks for diesel engine vehicles since 2012, and we also accommodate the production of various other tanks. *For more details, please refer to the PDF document or feel free to contact us.

Company：タカギセイコー
Price：Other

plastic
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Molding technology for automotive under panels

Introducing molding techniques and considerations such as "stress analysis" and "frequency response" as part of the "preliminary study"!

We have summarized the molding technologies and considerations related to the underpanel that covers the underside of the automobile. As requirements for the "preliminary study," "stress analysis," "frequency response," and "thermal analysis" are mentioned. In the related links, we also introduce "manufacturability studies," "mass production systems," and "quality assurance." 【Preliminary Study】 ■ Requirements - Stress analysis, frequency response, thermal analysis ■ Manufacturability Studies - Used resins, product shapes, PL settings, runner settings (flow analysis) - Block molding technology, gas vent design, resin flow analysis *For more details, please refer to the related links or feel free to contact us.

Company：三光合成
Price：Other

Stress Analysis
others
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Special forming technology

Introducing our special molding technologies such as insert molding and vacuum/pressure molding!

Sun Label specializes in special molding techniques such as insert molding and in-mold molding, and we have been receiving orders from major home appliance manufacturers for over 25 years. Insert molding is a method that integrates two materials, such as metal and resin, into a single component. It is mainly used in home appliances and automotive parts and can accommodate three-dimensional curved surfaces. Vacuum forming and pressure forming are molding methods that involve heating and softening films or sheets and adhering them to a mold. Compared to injection molding, these methods require less cost and time for mold production and can accommodate various shapes and designs. 【Special Molding Technologies】 ■ Insert Molding / In-Mold Molding ■ Vacuum Forming / Pressure Forming *For more details, please refer to the PDF document or feel free to contact us.

Company：サンラベル
Price：Other

Processing Contract
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insert molding technology using vertical molding machines.

We can accommodate dozens of parts! We can configure electronic circuits that consolidate relays and other components. <Materials available upon request>

We would like to introduce our "Insert Molding Technology using Vertical Molding Machines." It is common to process molded products primarily with horizontal molding machines; however, in the case of horizontal machines, it is difficult to hold the components, resulting in simple shapes for insert parts. The molding technology we propose involves insert molding with vertical molding machines, which can accommodate dozens of components, allowing for the construction of busbars with conductive materials and the integration of electronic circuits such as relays and switches. 【Features】 ■ Insert molding with vertical molding machines ■ Capable of accommodating dozens of components ■ Possible to construct electronic circuits that integrate relays and switches using busbars made of conductive materials *For more details, please refer to the related links or feel free to contact us.

Company：L＆Aデバイス
Price：Other

Contract manufacturing
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low-pressure sealing molding (hot melt molding) technology

Epoxy resin and polyurethane resin potting alternatives. Low-pressure molding (LPM) using plant-based hot melt. Towards lightweight, high functionality, and high efficiency.

Bostik Nitta Co., Ltd. handles plant-based thermoplastic hot melt polyamide (HMPA). We can provide proposals from the initial consideration of materials and equipment to prototyping and mass production. Please feel free to contact us for more details. Our products have heat resistance up to 150°C and high adhesion strength, and are utilized for fixing and sealing waterproofing of electronic components such as substrates and sensors through low-pressure injection molding. Furthermore, low-pressure injection molding (LPM) technology plays an important role not only in sealing, filling, and fixing electronic components (automotive, electrical and electronic industries) but also in protecting products from dust, dirt, heat, and moisture. Hot melt does not require curing and contributes to improved production efficiency. 【Features】 ■ Improved production efficiency (reduced man-hours and time) ■ High design flexibility ■ Reduced material and equipment costs ■ High heat and environmental resistance ■ High functionality and adhesion strength ■ Sustainable and reusable *You can download the catalog.

Company：ボスティック・ニッタ
Price：Other

others
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding technology

Leave injection molding technology to us!

Our company is capable of producing products in various shapes and offers injection molding technology backed by high skills and extensive experience. We have established a production system and equipment to meet customer needs for large quantities, stability, and high quality. Please feel free to consult us if you have any requests. [Applications] ■ Automotive parts: Engine components, various in-house holders ■ Electrical product parts: Air conditioner filters, outdoor unit bases, washing machine rubber feet, pulsators ■ Housing materials: Sink reinforcement materials, handrails, etc. ■ Others: Braille tiles, ski boots, yacht parts *For more details, please download the PDF or feel free to contact us.

Company：昭和アルファックス
Price：Other

Processing Contract
Injection Molding Machine
Molding Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Molding Technology Product List and Ranking from 58 Manufacturers, Suppliers and Companies | IPROS GMS

Molding Technology Manufacturer, Suppliers and Company Rankings

Molding Technology Product ranking